REFLECTOR: CHT monitor

[aminetech at bluefrog.com]

Thanks.  Actually there are 6 x 1 ft leads connecting to the single ground and they are larger also.

--- ALVentures at cox.net wrote:

From: "Al Gietzen" <ALVentures at cox.net>
To: "'Velocity Aircraft Owners and Builders list'" <reflector at tvbf.org>
Subject: Re: REFLECTOR: CHT monitor
Date: Tue, 17 Mar 2009 14:06:49 -0800

No problem - ground is ground.  I guess your saying the single grnd is
larger, probably just because It doesn't take up too much space, and may as
well reduce any loss in the grnd lead.

Al 

-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of aminetech at bluefrog.com
Sent: Tuesday, March 17, 2009 8:59 AM
To: Velocity Aircraft Owners and Builders list
Subject: REFLECTOR: CHT monitor

I'm installing a digital CHT, single readout gauge using a Westach switch to
switch amoung the 6 cylinders.  The wiring that comes with the switch
connects all the grounds into a single lead.  I assume that is not a
problem?  Also, the ground wires are larger and I'm wondering why?

John
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html