REFLECTOR: CHT monitor
Al Gietzen
ALVentures at cox.net
Tue Mar 17 17:06:49 CDT 2009
No problem - ground is ground. I guess your saying the single grnd is
larger, probably just because It doesn't take up too much space, and may as
well reduce any loss in the grnd lead.
Al
-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of aminetech at bluefrog.com
Sent: Tuesday, March 17, 2009 8:59 AM
To: Velocity Aircraft Owners and Builders list
Subject: REFLECTOR: CHT monitor
I'm installing a digital CHT, single readout gauge using a Westach switch to
switch amoung the 6 cylinders. The wiring that comes with the switch
connects all the grounds into a single lead. I assume that is not a
problem? Also, the ground wires are larger and I'm wondering why?
John
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
More information about the Reflector
mailing list