REFLECTOR: Oil cooling

[John Dibble]

Thanks, Barry.  You're right.  I pulled on the insulation as hard as I could with
jerking motions and finally got it to move and discovered it ran only 6-8" into the
duct.  Had it ran all the way, it never would have moved and removing the line would
have been too much work.

John

gibbons wrote:

> John
> That might be a little big for a project. I would just ventilate the
> tunnel.
> Barry XL
> Rosamond Ca.
>
> -----Original Message-----
> From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
> Behalf Of John Dibble
> Sent: Wednesday, June 24, 2009 5:33 AM
> To: Velocity Aircraft Owners and Builders list
> Subject: Re: REFLECTOR: Oil cooling
>
> It looks like my oil lines are insulated inside the duct.  Is it ok to
> remove the insulation (if that's possible) since I will be ventillating
> the duct?
>
> John
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>   ------------------------------------------------------------------------
>
> Internal Virus Database is out of date.
> Checked by AVG - http://www.avg.com
> Version: 8.0.175 / Virus Database: 270.12.45/2141 - Release Date: 5/29/2009 6:28 AM