REFLECTOR: 520 on a STD Fuselage
nmflyer1 at aol.com
nmflyer1 at aol.com
Sat Jun 13 21:42:05 CDT 2009
Looks good Scott!
Kurt
-----Original Message-----
From: Scott Derrick <scott at tnstaafl.net>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Sat, Jun 13, 2009 7:30 pm
Subject: REFLECTOR: 520 on a STD Fuselage
Pictures aren't the best..
Top cowl is in the middle of smoothing process with micro. The length
of the cowling didn't change but its much wider and thicker at the end.
Not nearly as much taper.
http://tnstaafl.net/canards/img130.jpg
http://tnstaafl.net/canards/img133.jpg
With cowling removed, it takes up a lot of space! I thought I had the
prop at exactly the same distance from the firewall as on the IO360,
but later measurements showed it is 1/2 inch further aft.
http://tnstaafl.net/canards/img13.jpg
http://tnstaafl.net/canards/img135.jpg
http://tnstaafl.net/canards/img137.jpg
It was a cloudy, wet and windy day, so the pics were in the hanger, next
time I'll get some pics in the sunshine so there is more detail.
Scott
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20090613/2263f739/attachment.htm>
More information about the Reflector
mailing list