REFLECTOR: Moving my roll servo.

victor taylor velocityoner at yahoo.com
Sat Jun 13 00:19:31 CDT 2009


Scott,
 
How about a picture of that 520 on the back of a standard fuselage. Sounds fast!
 
Victor Taylor
Velocity 93DV

--- On Fri, 6/12/09, Scott Derrick <scott at tnstaafl.net> wrote:


From: Scott Derrick <scott at tnstaafl.net>
Subject: REFLECTOR: Moving my roll servo.
To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
Date: Friday, June 12, 2009, 9:55 PM


Yesterday I was finally re-installing the roll servo, which means that
the wings are finally back on and it starting to look like a plane
again! Because the 520 is so close to the firewall, for cg reasons, I
knew it was going to be tight.  With the IO360 there was a plethora of
space.

There turned out to be just enough room on the fire wall with a fairly
straight shot for the linkage arm, maybe 7-8 degrees of slant.  But, the
proximity of the firewall to the engine makes maintenance and inspection
a  truly aerospace like experience.  Now that the plenum is on its
really getting tight back there.

I realized that installing the servo on the firewall in the only spot
left almost completely  blocked  access  to the accessory case from the
pilot side. A similar situation would exist on the copilot side.  In
fact I would have to remove the servo to change the oil filter!  

I played with a couple of ideas about making a quick removal kind of
mount for the servo but after some thought figured that was a bad idea.
Last thing I want is to have a major component of the roll control
system being R&R'd on a regular basis.

I remembered that  somebody had mentioned installing the roll servo
behind the back seat!  Hmm...   I played with that by setting the servo
in various places  and realized  that it would work.   I would loose 
some feet room, but  that back seat  area is the roomiest part of the
whole airplane.

I found some pictures posted by Doug Holab that showed a nice clean
installation of the servo in that area. 

Doug,  is that working out?

Anybody else mount their servo in the back seat area?  Have any
recommendations or gotchas about that?

Another big gain for me in moving it forward is cg. No matter how much I
move forward I'm sure I'm looking at some dead weight in the nose to get
the cg where it needs to be.  But any little bit helps and those servos
are heavy!

Scott  
>


-----Inline Attachment Follows-----


_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20090612/e8a2ed77/attachment.htm>


More information about the Reflector mailing list