REFLECTOR: Nice brake upgrade
Velocity
VelocityXL at fastmail.fm
Tue Jul 14 08:54:08 CDT 2009
Seams like a great way to upgrade the braking system. Any one used the new brakes yet?
----- Original Message -----
From: Don Johnston
To: reflector at tvbf.org
Sent: Sunday, July 12, 2009 12:12 PM
Subject: REFLECTOR: Wing attach bolt hole?
I have recently completed my brake upgrade which involves improving the brake fade problem with Matco brakes. Rather than bore all the Cleveland equipped builders, I'll just direct you to my build page. I apologize if it seems basic, but I have friends and family that are following my build so I try to keep it simple.
http://www.velocity-xl.com/brakes.html
And finally, I have fastbuild wings with a small access hole in the top and bottom. It's a real pain trying to get the nut on the bolt through that hole.
1) I have better access if I put the bolt in through the wing and the nut on the front (through the strake). Is this acceptable or does the bolt have to go in the front?
2) I've seen that some builders put a single large hole in the bottom of the wing that goes up to the top. This also eliminates the small access hole cover on the top of the wing. Is this an acceptable retrofit?
Don Johnston
XL-RG
www.velocity-xl.com
------------------------------------------------------------------------------
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20090714/c7f20004/attachment.htm>
More information about the Reflector
mailing list