REFLECTOR: Induction scoop

[Scott Derrick]

I was going to make the scoop large enough to hold the air filter but
that would seem quite a bit larger than your saying...

Maybe I need to reduce its cross section even more?

I'm trying to get my head around 406 cubic ft per minute, flowing at 200
mph and how large an opening that is accounting for filter and turning loss?

Using this nifty calculator

http://www.comairrotron.com/airflow_calc.shtml

it looks like your saying an optimal(no restrictions) circular scoop
would have an opening of 2" diameter at 200 mph?  Thats
amazingly small!

Scott

Al Gietzen wrote:
> Scott;
>
> Not to worry; the most pressure you would ever see in the scoop is about 0.5
> psi.; well, unless you get a serious back-fire - that might be worse.
>
> Just a reminder that on an induction scoop the edge at the entrance should
> be very rounded; like 0.25 radius or so.  When the plane is moving very
> slowly; like beginning the takeoff roll, the air is being drawn from all
> directions, and the rounded entrance will reduce the pressure drop.  For max
> ram pressure at speed you'll want to size the entrance for flow velocity
> just a bit less than the aircraft speed for the expected engine rpm and
> displacement.  But then you probably knew that.
>
> Best,
>
> Al
>
>
> -----Original Message-----
> From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
> Behalf Of Scott Derrick
> Sent: Monday, July 06, 2009 12:00 PM
> To: Velocity Aircraft Owners and Builders list
> Subject: REFLECTOR: Induction scoop
>
>
> I'm reshaping the induction scoop(P51 style) and was wondering if I need
> to do anything  about pressure  building up in it?
>
> Unlike a cooling scoop that always has flow through it, I can pull the
> engine to idle, which is shutting down the flow.
>
> Think I could blow up the scoop at high speeds? 
>
> Should I put a spring  loaded  door  on it to  open at  high pressures?
>
> this is the original scoop, before shrinking and putting a new flange on it.
>
> http://www.eharwood.com/catalog/product.php?productID=344
>
> Scott
>
>
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>   

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 260 bytes
Desc: OpenPGP digital signature
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20090706/4decb7be/attachment.pgp>