REFLECTOR: RMI Monitor
Michael Watson
mikewatsspg at gmail.com
Thu Jan 29 14:11:31 CST 2009
Check and clean all ground connections associated with the unit.
On Thu, Jan 29, 2009 at 2:03 PM, <aminetech at bluefrog.com> wrote:
> My RMI monitor has been giving erratic readings for several years. At
> first it was just the carb temp which often fluctuated from -15 to 19 C.
> Then my fuel pressure would drift up from 6 psig to as high as 31 and often
> fluctuate in that range. In the last year my CHT reading began
> fluctuating. It always happens after an hour or so of flying. If I land
> and shut down and then fly right away, it works fine for another hour.
> Lately the fluctuation range is as large as 0 to 500 C and sets off the
> alarm if it stays high for more than a few seconds. I have called RMI
> several times and they keep telling me I must have a loose connection. I've
> checked, but found nothing so far. Anyone else had this problem?
>
> John
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
--
Mike W.
1997 Velocity Elite RG
Franklin /IVO Electric CS
Dual GRT EFIS Synthetic Vision
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20090129/66c27798/attachment-0001.htm
More information about the Reflector
mailing list