REFLECTOR: Gear Plumbing
Jon Bachman
jbachman at zianet.com
Mon Jan 26 11:00:55 CST 2009
Thanks Al
Jon Bachman
_____
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Al Gietzen
Sent: Friday, January 23, 2009 5:17 PM
To: 'Velocity Aircraft Owners and Builders list'
Subject: Re: REFLECTOR: Gear Plumbing
1/4" x .035 wall. 6061 would be fine as well, but may work harden a little
more if you bend it more than once.
Al
-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Jon Bachman
Sent: Friday, January 23, 2009 10:13 AM
To: Velocity Aircraft Owners and Builders list
Subject: REFLECTOR: Gear Plumbing
I need to replace some of my aluminum tubing for my retractable gear system.
The Std RG build book I have specifies 5052 Al tubing but I can't find any
other specifications like OD, or wall thickness. Aircraft Spruce has too
many choices. Can anyone relay the specs? Thanks
Jon Bachman
N956DR
Std RG
575 430-9724
jbachman at zianet.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20090126/e60c11cc/attachment.htm
More information about the Reflector
mailing list