REFLECTOR: Special O-Rings
nmflyer1 at aol.com
nmflyer1 at aol.com
Thu Jan 22 11:42:29 CST 2009
Scott,
Call Southwest Seal & Supply here in ABQ. 505-889-8828.? If you need me to pick them up. let me know.
Kurt
-----Original Message-----
From: Scott Derrick <scott at tnstaafl.net>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Thu, 22 Jan 2009 8:06 am
Subject: REFLECTOR: Special O-Rings
Whilst attempting to tune the turbo/induction system on a TSIO520, I
found out the wastegate controller was leaking oil into the upper deck
pressure side of the unit.
I dissembled it and found the "O" rings needed replacement. not many
hours on the unit but a lot of years.
The three large rings were a standard size but the small one is not. Its
close to a -008 size O-ring(3/16x5/16x1/8) but with a width of 3/32
instead of 1/8 of an inch.
I've searched and searched for an O-ring with a (3/16x5/16x3/32) but
can't find one on line.
Any suggestions?
Scott
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20090122/855f02a0/attachment.htm
More information about the Reflector
mailing list