REFLECTOR: (no subject)
Al Gietzen
ALVentures at cox.net
Wed Feb 25 20:08:00 CST 2009
Ron;
You'll have to tell us how you envision it being installed. It can't support
the load on the nose gear, and is not designed for side loads, so I'm unable
to envision how it could be used.
Yes, something of that nature installed between the fork and the leg could
be very helpful; but I don't think this is it.
Al
-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Velocity xl
Sent: Wednesday, February 25, 2009 5:16 PM
To: reflector; reflector at tvbf.org
Subject: REFLECTOR: (no subject)
http://www.efdyn.com/pdf/xcrd%20page.pdf
Here is an idea for a Dampener I dreamed up. There are people that know the
forces
involved here better than I. May be they could tell if this device would
work to stop our
Shimmy problem. Simple small and clean if it would work. Dampener is at the
bottom of the
Gear leg.
Ron
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20090225/92d01e67/attachment.htm
More information about the Reflector
mailing list