REFLECTOR: hole in the prop

[Tom]

In a message dated 9/13/2008 12:20:47 PM Pacific Daylight Time,  
douglas.holub at gmail.com <http://www.tvbf.org/mailman/listinfo/reflector> writes:

I was going to varnish the wood, then thought  that maybe the bare wood 
center hole is there to let moisture  out.



That is exactly why it's not varnished.
TEC



Isn't that like drilling a hole in the bottom of a boat to let the water out?? Doesn't the bare wood let the moisture IN??