REFLECTOR: Lord Mounts

[Terry Miles]

Dave,

Thanks for the added comments. I am filing them w/ my torque list.   I am on
it today.

Terry

  _____  

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of davedent at comcast.net
Sent: Tuesday, September 09, 2008 1:26 AM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Lord Mounts

 

When it comes to engine mounts I have always torque the 7/16" bolts to 38ft
lbs and have had very good success with them.  It looks like your mount bolt
is not torque correctly.  But may be just fine.  Just torque them to 38lbs
and they should be OK. Make sure you bolts are not bottomed out.  Like being
to long.  Also that the spacer is also installed. 

 

Remember also that most rubber products get harder with age.  In the
environment that our engines run in I wouldn't keep them more then eight
years.  Even less it they start cracking.  

 

Believe me there is a difference between manufactures of mounts as well.
You get what you pay for. 

 

Also keep solvents and oils away from them and keep them clean.  The harder
they get the less effective they are and so being more damage is done to the
rest of the plane. Don't take rubber mounts lightly. They do a lot more then
just hold the engine in place.  

Dave

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20080909/e9e98ddf/attachment.htm