REFLECTOR: Lord Mounts

[Jim Agnew]

It doesn't look like the mount bolt is tight.  
 
 James F. Agnew
Jim_Agnew_2 at Yahoo.Com
Tampa, FL
Velocity 173 Elite Aircraft Completed & Flying



----- Original Message ----
From: Terry Miles <terrence_miles at hotmail.com>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Monday, September 8, 2008 8:09:36 AM
Subject: REFLECTOR: Lord Mounts


I am in the proccess of doing my first annual.  I have an IA watching over my shoulder on this first go around.
 
Here is a pic of one of my lower lord mounts.  Both lower mounts look about the same.  
 
The nose is to the left as you view the pic.  You can see the “aft” rubber donut is pulled away from the face of the engine attach flange.  The upper mount donuts are fine.  They are both flush faced and show some compression to the front and back contact area on the engine mouse ear.  
 
Is this spread on the aft half of lower mounts normal?  
 
Thanks
 
Terry
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20080908/2fdc04ef/attachment.htm