REFLECTOR: Nicopress tools

Christopher Barber CBarber at texasattorney.net
Thu Sep 4 13:27:19 CDT 2008


I have gotten most of the right strake cleaned up by removing the Jeffco. 
However, due to mostly unfounded concerns about hurricanes and a shift 
change at work and a pretty busy dating schedule (geeeesh, dating is 
exhausting<g>), I have had little time to get out to the hangar over the 
last several days.  Tomorrow is my first day off in ten days and I hope to 
spend the bulk of it at the airport.

All the best,

Chris

----- Original Message ----- 
From: "Milton Mersky" <miltonm at airmail.net>
To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
Sent: Wednesday, September 03, 2008 9:53 PM
Subject: Re: REFLECTOR: Nicopress tools


>
> Chris:
>
> What is the status of the strake rebuilding?
>
> Milt
>
>
>
>
>
> ----- Original Message ----- 
> From: "Christopher Barber" <CBarber at texasattorney.net>
> To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
> Sent: Wednesday, September 03, 2008 9:03 PM
> Subject: Re: REFLECTOR: Nicopress tools
>
>
>>I saw them at boat shops for a couple of hundred.  I got one off of ebay
>>for
>> $35.00 that looked the same and worked as expected.  Of course a couple 
>> of
>> months after buying it, I found one in one of the EAA Chapter boxes I had
>> been storing in my hangar.  Murphy striks.
>>
>> All the best,
>>
>> Chris Barber
>>
>> -----Original Message-----
>> From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org]On
>> Behalf Of jewen at comporium.net
>> Sent: Wednesday, September 03, 2008 5:44 PM
>> To: Velocity Aircraft Owners and Builders list
>> Subject: Re: REFLECTOR: Nicopress tools
>>
>>
>> I bought from AS&S
>> # 2 SWAGE IT SWAGING TOOL 12-12000 $18.65
>> GA-1P GO NO-GO SLEEVE GAUGE 13-03814 $11.50
>>
>> May not be the best tool if you were producing cables, but suitable for
>> the
>> few swags we have to make.  The sleeve gauge is to check the nicopress 
>> has
>> been properly swagged.
>>
>> Joe
>>
>> ---- Original message ----
>>>Date: Wed, 3 Sep 2008 11:55:25 -0400
>>>From: "Brooke Wolf" <bwolf1 at tds.net>
>>>Subject: REFLECTOR: Nicopress tools
>>>To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
>>>
>>>   Looks like I get to buy another tool.  Can anybody
>>>   recommend a nicropress tool that is suitable for our
>>>   application (gear retract cables, rudder, etc)?
>>>
>>>   Thanks,
>>>
>>>   Brooke XLRG-5
>>>________________
>>>_______________________________________________
>>>To change your email address, visit
>> http://www.tvbf.org/mailman/listinfo/reflector
>>>
>>>Visit the gallery!  www.tvbf.org/gallery
>>>user:pw = tvbf:jamaicangoose
>>>Check new archives: www.tvbf.org/pipermail
>>>Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>> _______________________________________________
>> To change your email address, visit
>> http://www.tvbf.org/mailman/listinfo/reflector
>>
>> Visit the gallery!  www.tvbf.org/gallery
>> user:pw = tvbf:jamaicangoose
>> Check new archives: www.tvbf.org/pipermail
>> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>>
>>
>> _______________________________________________
>> To change your email address, visit
>> http://www.tvbf.org/mailman/listinfo/reflector
>>
>> Visit the gallery!  www.tvbf.org/gallery
>> user:pw = tvbf:jamaicangoose
>> Check new archives: www.tvbf.org/pipermail
>> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>>
>>
>
> _______________________________________________
> To change your email address, visit 
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
> 




More information about the Reflector mailing list