REFLECTOR: Nicopress tools

[Christopher Barber]

I saw them at boat shops for a couple of hundred.  I got one off of ebay for
$35.00 that looked the same and worked as expected.  Of course a couple of
months after buying it, I found one in one of the EAA Chapter boxes I had
been storing in my hangar.  Murphy striks.

All the best,

Chris Barber

-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org]On
Behalf Of jewen at comporium.net
Sent: Wednesday, September 03, 2008 5:44 PM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Nicopress tools


I bought from AS&S
# 2 SWAGE IT SWAGING TOOL 12-12000 $18.65
GA-1P GO NO-GO SLEEVE GAUGE 13-03814 $11.50

May not be the best tool if you were producing cables, but suitable for the
few swags we have to make.  The sleeve gauge is to check the nicopress has
been properly swagged.

Joe

---- Original message ----
>Date: Wed, 3 Sep 2008 11:55:25 -0400
>From: "Brooke Wolf" <bwolf1 at tds.net>
>Subject: REFLECTOR: Nicopress tools
>To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
>
>   Looks like I get to buy another tool.  Can anybody
>   recommend a nicropress tool that is suitable for our
>   application (gear retract cables, rudder, etc)?
>
>   Thanks,
>
>   Brooke XLRG-5
>________________
>_______________________________________________
>To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
>
>Visit the gallery!  www.tvbf.org/gallery
>user:pw = tvbf:jamaicangoose
>Check new archives: www.tvbf.org/pipermail
>Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html