REFLECTOR: Vacuum Pump

[Brian Michalk]

There was a product that used manifold vacuum.  Pretty expensive for 
what it was.  Problem is that it didn't work well at higher manifold 
pressures.
If you have a high performance overlapped cam, then you may not even 
make enough vacuum at idle.

Velocity wrote:
> Has any one come up with a electric vacuum pump
> to run there Vacuum gauges?
>  
> I have looked at a few electric smog pumps  but they  just do not draw 
> enough vacuum.
>  
>  
> Before you tell me to go all electric I have heard that already . If I 
> had the money I would do all sorts
> of things but I do not so I am trying to keep it Cheap.
>  
> I already have the Gauges just need a way to run them.
>  
> Oh by the way this is an LT1 engine install. So the
> engine driven vacuum pump is a little more complicated
> to get installed.
>  
> Ron
>  
>  
> ------------------------------------------------------------------------
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html