REFLECTOR: Emailing: Nose door operator

[John Dibble]

Thanks Dave,

What size springs are you using?

John

davedent at comcast.net wrote:

> I never moved the door rod attach points. I used the same ones that
> the ball rod end attached to for the hyd. control system.  No change
> in that part of the hinge at all.  Just put a large area washer with a
> smaller washer behind it to clear the spring end as it went through
> the larger area washer that I drilled a hole through for the spring
> end. The large area washer has to pivot. The wheel clears the doors by
> an inch and as it comes out.  The strut leads the wheel so the doors
> are opening before the wheel makes contact.I will have to put it all
> up on jacks to make the movie and this will take some time that I
> don't have right now.Dave
>
>    ----------------------------------------------------------------
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives:
> http://www.tvbf.org/archives/velocity/maillist.html
>
>    ----------------------------------------------------------------
>
> Internal Virus Database is out of date.
> Checked by AVG - http://www.avg.com
> Version: 8.0.175 / Virus Database: 270.8.5/1755 - Release Date:
> 10/29/2008 5:27 PM
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20081122/aebaba1a/attachment.htm