REFLECTOR: ceramic coated exhaust pipes

Scott Derrick scott at tnstaafl.net
Mon Nov 3 08:44:33 CST 2008


Yeah, there must be something to this.  I searched for info that was 
negative about ceramic coating and couldn't find anything, other than it 
not sticking.

I wonder how well it would stick in used pipes.  I'd hate to have it 
slough off and run through my turbo..

Scott

Tom wrote:
> Al, there are some advantages, particularly for those with updraft 
> cooling. You're correct about the outside coating not doing much. A 
> good, inside coating is needed which only a few places do well. I've got 
> the short stacks from Velocity and since they slip apart, they were able 
> to get a good coat on the inside.( Jet-Hot) I did gain over 100 static 
> rpm after install but I believe that was mostly due to the exhaust 
> system change. It's definitely cooler under the cowling, cooler CHTs and 
> less risk of heat damage on tightly closed cowlings. I can hold my hand 
> on the exhaust shortly after shutdown.
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
> 


More information about the Reflector mailing list