REFLECTOR: trio ez autopilot

[Lou Stedman]

Thanks Tom

Lou Stedman
Velocity N7044Q
Olean, NY
----- Original Message ----- 
From: "Tom" <tomcat05 at comcast.net>
To: <reflector at tvbf.org>
Sent: Monday, November 03, 2008 7:39 AM
Subject: REFLECTOR: trio ez autopilot


> Lou, the 150XL has a standard NMEA0183 output. This is a digital signal,
> the VOR is an analog signal. There must be some kind of converter wired
> to your switch and this is probably gumming up your GPS output signal to
> the autopilot. Would suggest you run the output GPS wire directly to
> your A/P input wire and forget about the VOR signal. You may have to
> reset your output baud rate in the GPS, the Trio manul will tell you
> what it needs to be.
> _______________________________________________
> To change your email address, visit 
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.175 / Virus Database: 270.8.5/1762 - Release Date: 11/2/2008 
9:51 AM