REFLECTOR: dynafocal engine mount, fit
Al Gietzen
ALVentures at cox.net
Thu May 15 01:30:28 CDT 2008
One used the 2x4
> to
> pry the mount open and the third slid the bolt in. I don't know if it is
> the same for the IO-360. I know I don't want to have to take the thing
> off
> again. :)
I know zip about mechanical design but my gut-feeling about the stress in
the engine mount
joints if it was off enough to have to use a 2x4 to deform it is scary.
I'd assume it is still within the elastic limit; but wouldn't the idea be
to drill the holes to fit the mount rather than stress the mount to fit the
holes?
Al
More information about the Reflector
mailing list