REFLECTOR: Overhead switch panel

[David Bertram]

My overhead panel is screwed into place.  I just remove four screws and pull
it down.  Dave B
N350TX 
 
-------Original Message-------
 
From: Velocity Aircraft Owners and Builders list
Date: 05/10/08 09:32:17
To: reflector at tvbf.org
Subject: REFLECTOR: Overhead switch panel
 
I'm coming down to the wire on assembly. One thing I've been pondering is a
method to install the overhead switch panel so that I can remove it if
necessary. Has anyone come up with a method for this? My old assembly manual
just says glass it in, and I couldn't even find the section in the online
manuals. 
There are enough switches and things in there that removing it for work
makes the most sense. 
 
The new master cylinders are in place: 

I plan on installing the Nylaflow through the conduit tubes and bleeding the
brake this week. 
Then it is the overhead switch panel and forward door beams. 
 
Then Paint prep and interior. 
 
Kurt Winker
173FGE Chev 4.3L Aluminum V-6






Wondering what's for Dinner Tonight? Get new twists on family favorites at
AOL Food.
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20080510/cfce2000/attachment.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 14296 bytes
Desc: not available
Url : http://www.tvbf.org/mailman/private/reflector/attachments/20080510/cfce2000/attachment.jpeg