REFLECTOR: VG for naca scoop.
Laurence Coen
lwcoen at hotmail.com
Wed Mar 19 12:03:16 CDT 2008
Jim,
I have a standard Elite with a Franklin engine. When I first started flying, I had marginal oil cooling. I installed two VG's about 4" ahead of my oil cooler inlet. I made them out of 3/4" aluminum angle, 1" in length. They are angled nose in about 10 deg. and spaced 1.5" apart. This lowered my oil temperature 20 deg.
Larry Coen
N136LC
----- Original Message -----
From: Jim & Sharon Beck
To: Velocity Aircraft Owners and Builders list
Sent: Tuesday, March 18, 2008 3:55 PM
Subject: REFLECTOR: VG for naca scoop.
Can anyone tell me how far ahead of the oil cooler scoop to place the vgs to increase flow, also I want to put some ahead of my cabin ventilator on the bottom of the pan as I'm not getting much flow out of the vents in the back seat.
Any thoughts would be appreciated.
\Thanks
Jim
CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information or otherwise be protected by law. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.
----------------------------------------------------------------------------
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
------------------------------------------------------------------------------
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20080319/f29f77ea/attachment.htm
More information about the Reflector
mailing list