REFLECTOR: Main Gear Actuator

Jon Bachman jbachman at zianet.com
Mon Mar 10 13:50:22 CDT 2008


I'll check in better light than I had last night.  I tried shop air and some
firm quick yanks and it didn't budge.  The seals were leaking and causing
the pump to cycle.

 

Jon

 

  _____  

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of steve korney
Sent: Monday, March 10, 2008 11:36 AM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Main Gear Actuator

 

Check to see if there is a burr on the snap ring groove... That might be
holding it in...

Best... Steve

  _____  

From: jbachman at zianet.com
To: reflector at tvbf.org
Date: Mon, 10 Mar 2008 09:50:13 -0600
Subject: REFLECTOR: Main Gear Actuator

I tried to disassemble my RG STD main gear actuator to replace the seals
last night and ran into a dead end.  I removed the snap ring at the end
where the actuator shaft exits the cylinder and could not extract the
piston.  Is there something that I'm missing?

 

It is an ARO TEK actuator.

 

 

 

Jon

N956DR

 

 

 

  _____  

Climb to the top of the charts! Play the word scramble challenge with star
power. Play now!
<http://club.live.com/star_shuffle.aspx?icid=starshuffle_wlmailtextlink_jan>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20080310/61eeb6c6/attachment.htm 


More information about the Reflector mailing list