REFLECTOR: Velocity Parts Available
Robert Trent
RDTRENT1 at CHARTERMI.NET
Sun Mar 9 15:55:31 CDT 2008
The plane is flying and it is time to clean out the basement. I have a
variety of parts I do not need. Let me know if anyone is interested in
anything before I clean house.
Most of these parts are related to a Velocity 173 Elite Fixed Gear kit that
was originally purchased 1994 as a 173 FG with a clamshell door. I can
provide pictures as needed.
1) 2 ea. Side Windows medium tint. These were for the clamshell door
configuration. They are the 3 foot long windows
2) 1 ea Co Pilot Rear Side Window. This was for the clamshell door
configuration, triangular in shape.
3) One clamshell door latch cover
4) One set of Main Gear Wheel Fairings, original boxy style
5) One roll of UNI fiberglass cloth. (aprox 5 pounds)
6) One bag of micro balloons. This is a little less than a cubic foot.
The bag was never opened.
7) One set of down turned Canard Tips.
8) 2 Exhaust Fairings for the straight aft pointed exhausts
9) 2 Armpit scoops for the lower cowling air intakes
10) 2 aluminum external rudder control arms.
11) 1 Elevator control push pull rod 21 3/8 inches long.
12) 1 Side Inlet Oil Cooler Duct for nose mounted oil coolers
13) 1 set of Velocity vortex generators.
14) 1 set of Elite door trim panels
15) 1 ea Elite Seatback hinge left side
16) 2 ea Fuel Samplers these are the shot glass type with 3 inch pin
sticking up out of the middle of the cup.
Contact me offline
RDTRENT1 at CHARTERMI.NET
Bob Trent
Midland Michigan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20080309/81378e84/attachment.htm
More information about the Reflector
mailing list