REFLECTOR: Aileron torque tube bearing
jewen at comporium.net
jewen at comporium.net
Tue Jun 3 19:36:56 CDT 2008
Al,
Was the failure on the starboard or the port? If the starboard, any chance it is being influenced by heat from the exhaust?
Joe
---- Original message ----
>Date: Tue, 3 Jun 2008 07:35:49 -0800
>From: "Al Gietzen" <ALVentures at cox.net>
>Subject: REFLECTOR: Aileron torque tube bearing
>To: "reflector" <reflector at tvbf.org>
>
> I find that one of the aileron torque tube bearings
> at the bellcrank in the engine compartment has
> failed. It now has about 1/16" play, and slack in
> the controls is not a good thing. This seems a bit
> peculiar to me as the normal motion is slow and
> limited, and the normal loads minimal.
>
>
>
> Is this a unique occurrence, or have others had this
> happen? The underlying question is vibrational
> loads; lateral or torsional, that may have some
> resonance - like in that 4-5 ft length of
> unsupported torque tube.
>
>
>
> Al
>________________
>_______________________________________________
>To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
>Visit the gallery! www.tvbf.org/gallery
>user:pw = tvbf:jamaicangoose
>Check new archives: www.tvbf.org/pipermail
>Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
More information about the Reflector
mailing list