REFLECTOR: Failed RSA Bendix Fuel Servo

Ron Brown romott at mi-connection.com
Wed Jul 9 13:07:38 CDT 2008


MessageI think he said 80-90 knots.  He is in Birmingham this afternoon waiting for the servo to arrive tomorrow morning.  

I used 90 knots for my tests when I flew the practice tests.

Ronnie


  ----- Original Message ----- 
  From: gibbons 
  To: 'Velocity Aircraft Owners and Builders list' 
  Sent: Wednesday, July 09, 2008 10:35 AM
  Subject: Re: REFLECTOR: Failed RSA Bendix Fuel Servo


  Hello
  What was his glide speed to reach the airport?
  Barry


    -----Original Message-----
    From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Ron Brown
    Sent: Tuesday, July 08, 2008 12:04 PM
    To: Velocity Aircraft Owners and Builders list
    Subject: REFLECTOR: Failed RSA Bendix Fuel Servo


    As I mentioned last week, the new owner of my Velocity had the engine go real quiet while at 10,500 feet and 28 miles east of Birmingham, Alabama while he was flying back home to Texas.

    He declared an emergency and got vectors to land at Birmingham International.  When he got within the vicinity of the airport he had too much altitude (GREAT gliders those Velocities!!!).  He made a safe landing and was greeted by a host of emergency vehicles.

    His mechanic determined that the Bendix fuel servo was not delivering fuel.  He pulled it off and shipped it to Airflow Performance.  Don and Kyle determined that the nut holding the diaphragm had fallen off.  They checked the torque of the nut and found it was only 1 in oz which probably led to it falling off after 370 hours of operation.

    Don said he had never seen this happen before.  He guessed that who ever had rebuilt the fuel servo had reused this nut and should have replaced it with a new one.

    Luckily, the new buyer used his emergency training very well and my dearly departed Velocity is still in great shape and will soon be flying again.  And he will be flying with a newly overhauled fuel servo built by Airflow Performance (the folks that know what they are doing!!!! - and highly recommended by me!)

    Ronnie Brown  


------------------------------------------------------------------------------


  _______________________________________________
  To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

  Visit the gallery!  www.tvbf.org/gallery
  user:pw = tvbf:jamaicangoose
  Check new archives: www.tvbf.org/pipermail
  Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20080709/aa3db1d6/attachment.htm 


More information about the Reflector mailing list