REFLECTOR: tools, tools, and tools again

Brooke Wolf bwolf1 at tds.net
Mon Feb 4 12:27:51 CST 2008


Larry and Grigore

I would definitely consider a DH if they could come up with about a 300 HP version.  Diesel just seems like the future to me.  My time frame is about 2 years  for a XLRG-5.   Given that time frame, I will probably go with a Continental IO-550 EXP from Performance Engines in California.  

Any and all comments welcomed!

Grigore, I am basically a lurker but I really enjoy your posts.

Brooke
  ----- Original Message ----- 
  From: Lawrence J. Epstein, MD 
  To: 'Velocity Aircraft Owners and Builders list' 
  Sent: Monday, February 04, 2008 12:33 PM
  Subject: Re: REFLECTOR: tools, tools, and tools again


  It all depends on your time frame. If you are a year out from engine install, then you have more options. 

  Soon after delivery of the 1st production run, DH will have a "Firewall forward (back)" kit available for the Velocity, which according to Doug (who I spent about an Hour on the phone with a few months ago), should be very complete. Therefore, I wouldn't expect it to be a whole lot more "experimental" than the Lycosaurus.  

  The first production run (awaiting delivery) includes many velocity builders (not to mention all the prototype work to date), so there should be good experience by the time your engine would be delivered.

  If you need an engine in the next 12-18 months, then I would go with the Lyco.



  Larry Epstein



  -----Original Message-----
  From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Grigore Rosu
  Sent: Monday, February 04, 2008 10:59 AM
  To: Velocity Aircraft Owners and Builders list
  Subject: Re: REFLECTOR: tools, tools, and tools again



  Dear Larry,



  I was and still am a strong supporter of DH engines.  When I ordered my kit, I was 100% sure that I'd install a DH engine in my airplane.  In the meanwhile though, after realizing how much time everything takes, I changed my mind and decided to go for a standard and well-tested configuration.  There are many much more experienced builders than me who would be happy to go for an inovation like that, because they have a much beter big-picture than I do.

  My hidden (from wife) plan is to finish this SEFG and then, while flying it, to start building a new Velocity airplane, "the airplne of my drams", that time as an "experienced" builder.  That will definitely have a diesel engine (also, I intend to eventually move back to Europe, where diesel is a lot cheaper).



  Grigore


   

  On Feb 4, 2008 8:16 AM, Lawrence J. Epstein, MD <ljepstein at hotmail.com> wrote:

  Since you the have the luxury of some time before you make an engine choice (I lead a very luxurious life, I started my project 12 ½ years ago), you should at least take a close look at the Deltahawk diesel. With any luck, the production engines will be delivered and flying by the time you are ready. I won't go in to the advantages here (many pages of discussion in the archives as well as their web page), but it has been engineered & tested primarily on a Velocity and as Avgas gets more problematic, a diesel looks more & more advantageous.



  Larry Epstein

  173 FGE



  -----Original Message-----
  From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Grigore Rosu
  Sent: Monday, February 04, 2008 8:59 AM
  To: Velocity Aircraft Owners and Builders list
  Subject: REFLECTOR: tools, tools, and tools again



  Dear Reflectorists,



  Thank you everybody for the valuable input on tools and the engine.  Following your advise, I'll most likely go with the Lycoming 200HP, when the time comes.  My original 160HP choice was based exclusively on range, but I see the points you made, so probably in this case less range is OK for the increase in power.  I would still be grateful for an answer on the prop arc diameter ... or is the general advice to use a little cap chain and not worry about positioning?



  Regarding tools, I have just made another order with Aircraft Spruce; another $200.  I think I spent close to $2,000 so far on tools; I had almost no tools when I started my project.



  For those who are just starting their project, please do not underestimate:



  1) the number and cost of tools that you will need for your airplane; better be realistic than  have surprizes.  Of course, if you can borrow tools from a friend or another Velocity builder that is great; but I am totally isolated in a university city (Urbana-Champaign) and my friends only know how to write computer programs and solve mathematical equations; never heard of something called "pipe flaring" :-)



  2) the amount of extra-, initially unexpected time you'll need to spend scratching your head or waiting for tools/materials.  Give each subproject a generous estimate, then triple that.  I started fitting the pilot side lower strake on January 18 and I was convinced that I would close the top strake by the end of January if I give it all my time/energy.  There were the "unexpected" fuel senders, which slowed me down a few good days: "unexpected" because they were not even mentioned in the manual, and slowed me down because I had to order and wait for them, then learn how to install, ask, etc.  Well, now is Feb 4 and I still have to wait for the "unexpected" finger strainers, the AN fittings needed for the change in plans, etc.  Assuming I receive these by Thursday and did not forget to order some important little thing which will delay me one more week, then I may have a chance to close the strake by the end of the week, say Feb 10.  Applying the reasoning above, that probably means Feb 18 or so, making it about 1 month of work for one strake only.  There is this Jeffco thing, though, which I have never worked with and which has no proper webpage with detailed explanations on how to use; I can only optimistically hope that there will be no other "unexpected" issues with it ... though there always were ...



  Grigore




  _______________________________________________
  To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

  Visit the gallery!  www.tvbf.org/gallery
  user:pw = tvbf:jamaicangoose
  Check new archives: www.tvbf.org/pipermail
  Check old archives: http://www.tvbf.org/archives/velocity/maillist.html


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20080204/f7e733e2/attachment.htm 


More information about the Reflector mailing list