REFLECTOR: TruTrak Servo Screw - Safety item
Terry Miles
terrence_miles at hotmail.com
Mon Dec 29 15:00:15 CST 2008
John,
Thanks a lot for letting everyone know about this.
Terry
-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of John Tvedte
Sent: Monday, December 29, 2008 9:00 AM
To: Velocity Aircraft Owners and Builders list
Subject: REFLECTOR: TruTrak Servo Screw - Safety item
Just an FYI for those using the TruTrak autopilots. The screw which holds
the arm on the TruTrak servo can back out causing control arm blockage.
To all,
We are aware of this situation. This is most definitely an isolated
incident. We have over 10,000 servos in the field at this time, and to our
knowledge this is the only account of this ever happening. We are reviewing
options for a change in the way the arm is attached. When we reach a
decision we feel comfortable with, we will post up with the solution. This
solution will be available to all existing customers. Thanks everyone!
__________________
Lucas
Trutrak Tech Support
The incident is written about here:
http://www.vansairforce.com/community/showthread.php?t=36393
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
More information about the Reflector
mailing list