REFLECTOR: Investigation into Engine Failure
Al Gietzen
ALVentures at cox.net
Wed Aug 6 00:59:29 CDT 2008
I do worry about my radiator capacity- I have a properly sized belly ram
scoop, but the radiator is single row (supposedly for racing) and although
it has good size, it is rather thin- about 1.5" but might just work fine.
Alex;
'Thin' is fine, if you can fit in adequate core volume. With effective air
flow, it typically takes 2-2.5 cu. in. per hp. With a pusher an auxiliary
fan is generally required for effective cooling on the ground.
BTW; I have the RWS (Tracy) EC2 on my 3-rotor rotary - which I believe is
basically the same unit he sells for a 6-cylinder. I had one of the early
units, and had some headaches of being the beta tester. It has evolved
quite a bit since, and has been operating fine. Mine has 125 hours on it
now.
Best of luck,
Al
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20080805/9253460a/attachment.htm
More information about the Reflector
mailing list