REFLECTOR: Static Port
Michael Watson
mikewatsspg at gmail.com
Mon Aug 4 14:10:40 CDT 2008
Jim/Sharon,
I have two static ports, one on each side just behind and below the canard.
The tubes are ran just under the wind screen with a "T" fitting in the
center.
Has worked great for ten years,
On Mon, Aug 4, 2008 at 11:56 AM, Jim & Sharon Beck <jsbeck at charter.net>wrote:
>
>
> I have my static port below & behind the canard (from 97 plans on a 173
> RG with 3 holes drilled through the skin on the pilots side . this doesn't
> seem to give consistent or accurate static pressure.
> I am thinking of putting in 2 of the aluminum bond in ports and wondering
> what the consensus of the best location is.
> Thanks for your help
> Jim
> 173 RG
> 280 hours and still trying to get everything right.
>
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
--
Mike W.
1997 Velocity Elite RG
Franklin /IVO Electric CS
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20080804/0d93fc1d/attachment.htm
More information about the Reflector
mailing list