REFLECTOR: Its Alive!

[Richard J. Gentil]

I installed the instrument panel a week ago Friday and fired it up this 
last Friday. It only took four fittings to get the panel to fit, which I 
consider to be very lucky. My only problem was getting clearance for the 
25 pin plug on the back of the EFIS/Lite +. I am thrilled with the way 
it came out after installing the panel. I attached a picture of the panel.

While wiring in the, (what seems to be an endless number of), 
connections, I found that the new 70a Power Board from BMA had the wrong 
capacitors on it. The slow trip connections go instantly offline when 
you connect a landing light or pitot heat to it. I had to pull the power 
board and send it back to BMA.

My plan was to run the pitot heat, landing light (GE 4509), nav, and 
strobes off the power board. After this issue, it caused me to think 
about this again. I was wondering if anyone else is using the BMA Power 
Board with those items connected to it?

Richard
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Velo Panel.jpg
Type: image/jpeg
Size: 135436 bytes
Desc: not available
Url : http://www.tvbf.org/mailman/private/reflector/attachments/20080422/02a23581/attachment-0001.jpg