REFLECTOR: counter sink cutter

[Andy Millin]

Micro Stop Countersink.

http://www.wicksaircraft.com/catalog/product_cat.php/subid=2894/index.html

http://www.wicksaircraft.com/catalog/product_cat.php/subid=6080/index.html

You'll need to order the cutter for 3/16" 100 degree.

Works great.  Need to make a few test holes to set the depth.

Andy

-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Matt Bucko
Sent: Wednesday, September 19, 2007 2:51 PM
To: reflector at tvbf.org
Subject: REFLECTOR: counter sink cutter

Ok, I was just on the A/C Spruce site looking to order a 100 degree counter
sink. Well, there are  cages, cutters and pilots of all different sizes. I
guess I need to know what combo of pieces to order to make 100 degree
countersinks. What are you guys using?
Matt

_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html