REFLECTOR: Your prayers are answered! LED Lights for yourFuelSight Tubes.
Jim Agnew
jim_agnew_2 at yahoo.com
Wed Sep 12 08:49:34 CDT 2007
Hi Jorge,
I thought about these, however the high voltage power supplies could be a source of radio Etc. interference. May be fine, only testing will tell.
Jim
James F. Agnew
Jim_Agnew_2 at Yahoo.Com
Tampa, FL
Velocity 173 Elite Aircraft Completed & Flying
----- Original Message ----
From: Jorge Bujanda <bujanda at dslextreme.com>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Wednesday, September 12, 2007 9:32:43 AM
Subject: Re: REFLECTOR: Your prayers are answered! LED Lights for yourFuelSight Tubes.
I bought one set of these 6” white, mini-fluorescent lamps to place under a custom cover; very bright and even light upon testing but not flying yet.
http://www.jcwhitney.com/autoparts/ItemBrowse/c-10101/s-10101/p-100000153054/mediaCode-ZX/appId-100000153054/Pr-p_CATENTRY_ID:100000153054
Regards,
Jorge Bujanda
Velocity XL FG
Palmdale, CA
Website: http://members.dslextreme.com/users/jbujanda/
"Make your best case... not the best case."
"Spare the noise... convince through silence."
JB
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Terry Miles
Sent: Wednesday, September 12, 2007 4:31 AM
To: ' Jim Agnew '; ' Velocity Aircraft Owners and Builders list '
Subject: Re: REFLECTOR: Your prayers are answered! LED Lights for yourFuelSight Tubes.
Thanks, Jim. Great find.
Terry
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Jim Agnew
Sent: Tuesday, September 11, 2007 8:55 PM
To: Velocity Reflector
Subject: REFLECTOR: Your prayers are answered! LED Lights for your FuelSight Tubes.
You can now purchase stick on 12 V LED strips that are somewhat flexible and come in multiple colors and 3", 6", 9", & 12" lengths. They have about 1/8" Leds every 1/2" and the 9" draws about 60 ma. The strip is white, .300" W x 070" T. I cut mine to about 6" and it was perfect for my Fuel Sight Tubes. They all come two to a package and the 9" cost about $22.
These things look like they may have a lot of uses and they are bright.
See the following site
http://streetglowcom/site/led.ledstrips12.php
You can purchase them on-line or at ADVANCE AUTO PARTS and other stores.
Better yet you can cut them with a razor knife to other lengths. To cut them you must start at the end without wires and remove the LEDs 3 at a time. On the back you will see very small black resistors and you cut the strip about 1/16 of an inch above the resister. Power consumption goes down in direct proportion to the number of 3 led sets removed.
Jim
James F. Agnew
Jim_Agnew_2 at Yahoo.Com
Tampa , FL
Velocity 173 Elite Aircraft Completed & Flying
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070912/5db49270/attachment.htm
More information about the Reflector
mailing list