REFLECTOR: sump tank.
Alex
velocity_pilot at verizon.net
Sun Sep 9 22:52:43 CDT 2007
My gems sensor has 1/4"npt thread- put a long plate in the side of the tank
with 2 hard points one is about 1.5" down from the top, the other (plugged)
is about 3" just in case I get some foaming, I can move the sensor
-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of gattenby at tulsaconnect.com
Sent: Sunday, September 09, 2007 10:25 PM
To: Velocity Aircraft Owners and Builders list
Subject: REFLECTOR: sump tank.
As I drill and tap hardpoints...
I'd like to put one of those solid state "led" type
sensors in the sump tank. I know that we talked about
them
on the reflector years ago... but I can't find where I
saved that info.
What diameter hole do I want,
How far down from the top is purdent.
(too low and it cuts in to the Oh S--- reserve)
(too high and it will false alarm when the fuel return
gets bubbly)
Noel
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
More information about the Reflector
mailing list