REFLECTOR: Leaky Master Brake Cylinders

[Brian Michalk]

My master cylinders leak a few drops per day.  I took them apart to 
figure out where it's coming from.  The best I can figure is it's the 
screw that goes in from the bottom.  It looks like this screw is to keep 
the assembly from exiting the cylinder.

When I re-assembled them, I put a small gasket on the screw.  That 
didn't work.

I think the tip is bottoming out in the housing, which keeps the head 
from getting tight.

I was thinking about shaving off a few thousandths of the length of the 
screw.  Any other suggestions?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: michalk.vcf
Type: text/x-vcard
Size: 210 bytes
Desc: not available
Url : http://www.tvbf.org/mailman/private/reflector/attachments/20071012/9256052c/attachment.vcf