REFLECTOR: Loaner prop

[HYTEC45 at aol.com]

In a message dated 10/12/2007 5:19:27 A.M. Pacific Daylight Time,  
scott at tnstaafl.net writes:

I  
can't remember off hand what the 360 crank uses. My 520 had a 1.25" one,  
I think the 360 is 1".


Hmmm, I'd check that out.  The 360 should be the same as the  520.  Surely 
not 1" though.  Put a thin bead of permatex inside of the  crank against the 
shoulder the plug seats against.
 
TEC



************************************** See what's new at http://www.aol.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20071012/833f6847/attachment.htm