REFLECTOR: New Subscriber

Jorge Bujanda bujanda at dslextreme.com
Mon Nov 26 10:04:47 CST 2007


Welcome Bill
 
Regards,
Jorge Bujanda
Velocity XL FG 
Palmdale, CA
Website:  http://members.dslextreme.com/users/jbujanda/
 
"Make your best case... not the best case."
"Spare the noise... convince through silence."
                                                                         JB
 
  _____  

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Bill
Walker
Sent: Monday, November 26, 2007 6:24 AM
To: reflector at tvbf.org
Subject: REFLECTOR: New Subscriber
 
Hi All,
 
I'm Bill Walker and a XL-5 RG builder here in Indy. Here are my airplane specifics:  4 yrs
into the build, Performance Engines IO-550 with equal length ceramic coated headers and 2
collectors, Aerotronics panel, all electric with dual alternators, and dual PC-680
batteries. The airframe is structurally done, the engine is in, the underside is in final
primer and the gear is in final paint. The wiring is just now being completed. I am ready
to install a custom designed PreOiler this week, and the pitot system by the end of the
year. I hope to have it in the air by late summer next year.
 
I've made lots of changes to the kit from the control system to the seat design.  I'll
post some pics soon.
 
Anyone interested in an easy little change that could mean a lot: Dip the output shaft of
the Aileron Trim copier motor into Plastidip tool coating material for about three or four
coatings. Now, add a fourth wrap of the trim string and you will have a system with much
better "stiction", but will still slip when at the ends of system travel are achieved. 
 
If anyone has already posted this, I apologize for not going throughout the archives. 
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20071126/a179cb46/attachment.htm 


More information about the Reflector mailing list