REFLECTOR: control stick

Brian Michalk michalk at awpi.com
Wed Nov 21 10:17:39 CST 2007


I machined a few pairs.  I think I gave my spares to Mike Deeter.  He 
may still have an extra set.


Lawrence J. Epstein, MD wrote:
>
> Where can I get these?
>
>  
>
> -----Original Message-----
> *From:* reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] 
> *On Behalf Of *Jim Agnew
> *Sent:* Wednesday, November 21, 2007 9:42 AM
> *To:* Velocity Aircraft Owners and Builders list
> *Subject:* Re: REFLECTOR: control stick
>
>  
>
> All of you looking for a solid stick look at the following site.
>
>  
>
> http://www.tvbf.org/gallery/index.php?dir=airframe_construction%2FFlight%20Controls%2F
>
>  
>
> These bushings at easy to install and are very solid.
>
>  
>
> Jim
>  
>
> James F. Agnew
> Jim_Agnew_2 at Yahoo.Com
> Tampa, FL
> Velocity 173 Elite Aircraft Completed & Flying
>
>  
>
> ----- Original Message ----
> From: Ron Brown <romott at roadrunner.com>
> To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
> Sent: Wednesday, November 21, 2007 8:41:25 AM
> Subject: Re: REFLECTOR: control stick
>
> The new control stick is shown in the online manuals.  
> http://www.velocityaircraft.com/manuals/06_EGR.pdf page 6-20 for the 
> Elite. 
>
>  
>
> I had made an extra control stick when I was toying around with 
> handles for the stick.  A friend with a welder made the mod to add the 
> extra strap.  Works good, but there is still a bit of slop in the 
> stick pivot.  But it is not really noticeable when flying.
>
>  
>
> Ronnie
>
>  
>
>  
>
>     ----- Original Message -----
>
>     *From:* Joe Ewen <mailto:Jewen at comporium.net>
>
>     *To:* Velocity Aircraft Owners and Builders list
>     <mailto:reflector at tvbf.org>
>
>     *Sent:* Wednesday, November 21, 2007 1:10 AM
>
>     *Subject:* Re: REFLECTOR: control stick
>
>      
>
>     Hi Lou,
>
>      
>
>     I am not flying yet, but when assembling my stick, I had heard
>     discussion about slop in the stick.  I made a couple of parts that
>     seem to effectively eliminate the slop.  That said I have to say
>     it is not yet stood the test of time.  Attached are a couple of
>     pics.  The first of the parts, the second is one of the parts
>     installed on the stick.  The sliding surfaces are polished with
>     P-600 and the washer is Teflon.  The Teflon washer should be the
>     only wear item.
>
>      
>
>     Joe
>
>         ----- Original Message -----
>
>         *From:* Lou Stedman <mailto:stedmanlou at adelphia.net>
>
>         *To:* Reflector Velocity <mailto:reflector at tvbf.org>
>
>         *Sent:* Tuesday, November 20, 2007 5:41 PM
>
>         *Subject:* REFLECTOR: control stick
>
>          
>
>         I have developed a bit of slop in my control stick, about 1/4"
>         at the top of the stick. I have traced the problem to wear
>         between the control stick and the torque tube. My bird is one
>         of the early models so I expect this is not a uncommon
>         situation. Short of replacing the stick and/or the tube, is
>         there a better fix? I had thought about using a tapered pin
>         but with the for and aft movement of the stick, I don't think
>         that would work. Any suggestions would be appreciated.
>
>          
>
>         Lou Stedman
>         Velocity N7044Q
>         Olean, NY
>
>         _______________________________________________
>         To change your email address, visit
>         http://www.tvbf.org/mailman/listinfo/reflector
>
>         Visit the gallery!  www.tvbf.org/gallery
>         <http://www.tvbf.org/gallery>
>         user:pw = tvbf:jamaicangoose
>         Check new archives: www.tvbf.org/pipermail
>         <http://www.tvbf.org/pipermail>
>         Check old archives:
>         http://www.tvbf.org/archives/velocity/maillist.html
>
>     _______________________________________________
>     To change your email address, visit
>     http://www.tvbf.org/mailman/listinfo/reflector
>
>     Visit the gallery!  www.tvbf.org/gallery <http://www.tvbf.org/gallery>
>     user:pw = tvbf:jamaicangoose
>     Check new archives: www.tvbf.org/pipermail
>     <http://www.tvbf.org/pipermail>
>     Check old archives:
>     http://www.tvbf.org/archives/velocity/maillist.html
>
>
>
> -----Inline Attachment Follows-----
>
> _______________________________________________
> To change your email address, visit 
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>  
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html



More information about the Reflector mailing list