REFLECTOR: conduit in a conduit?

jewen at comporium.net jewen at comporium.net
Mon May 7 15:02:07 CDT 2007


Decomposition Temp of Nylon 6/6 is >300C
Decomposition:
     CO
     CO2




On Mon, May 7, 2007 1:23 pm, Hiroo Umeno wrote:
> I don't know a lot about chemistry...
>
>
> The site shows the material to be Nylon.  Is it combustible?  Does it
> generate harmful gas when burned?
>
> Hiroo
>
>
> From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
> Behalf Of Rene Dugas
> Sent: Monday, May 07, 2007 10:02 AM
> To: 'Velocity Aircraft Owners and Builders list'
> Subject: Re: REFLECTOR: conduit in a conduit?
>
>
> Scott,
> Thanks,
> I've been looking for this braiding for years.
> Rene'
>
>
> -----Original Message-----
> From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
> Behalf Of Scott Derrick
> Sent: Saturday, May 05, 2007 7:59 AM
> To: Velocity Aircraft Owners and Builders list
> Subject: Re: REFLECTOR: conduit in a conduit?
>
>
> Here's an interesting product that would protect for some abrasion..
> Fairly inexpensive too.
>
>
> http://cableorganizer.com/nylon/
>
>
> Scott
>
>
> Pat Shea wrote:
>
>
> Doug,
>
>
>
>
> Most of my wires run through 1/2" - 3/4" ID plastic
>
>
> conduits that I inserted into the fiberglass ducts.
>
> One starts in the engine compartment and the other
>
>
> back by the gear bulkhead. They both end on forward
>
> side of the canard bulkhead.
>
>
>
> It's real easy to replace or, more typically, add
>
>
> electrical wires this way. I leave an extra "pull
>
> wire" in the conduit just for this purpose.
>
>
>
> I did not run any coax, #2 starter wires, or the
>
>
> alternator output wire in the plastic ducts.
>
>
>
> I don't remember where I bought the conduit - It looks
>
>
> just like nylaflow with similar properties.
>
>
>
> In terms of chaffing, the grounded control cables are
>
>
> potentially worse than than the fiberglass. I actually
>
> ran my control cables outside the ducts to keep them
>
> away from oil lines, brake lines, electrical lines,
>
> etc.
>
>
>
> Pat
>
>
>
>
> --- Douglas Holub <doug.holub at tx.rr.com><mailto:doug.holub at tx.rr.com>
> wrote:
>
>
>
>
>
>
> Will my wires chafe if I just lay them in the
>
>
> fiberglass conduit? Do I need to put some sleeving
>
> around the wires to protect them?
>
>
>
> Doug Holub>
>
>
>
>
>
>
> __________________________________________________
>
>
> Do You Yahoo!?
>
>
> Tired of spam?  Yahoo! Mail has the best spam protection around
>
>
> http://mail.yahoo.com
>
>
> _______________________________________________
>
>
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
>
>
>
> Visit the gallery!  www.tvbf.org/gallery<http://www.tvbf.org/gallery>
>
>
> user:pw = tvbf:jamaicangoose
>
>
> Check new archives: www.tvbf.org/pipermail<http://www.tvbf.org/pipermail>
>
>
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>
>
>
>
>
>
>
>
>
>
> --
>
>
>
>
> -
>
>
>
>
> I worry about my child and the Internet all the time, even though she's
> too young to have logged on yet. Here's what I worry about. I worry that
> 10 or 15 years from now, she will come to me and say 'Daddy, where were
> you when they took freedom of the press away from the Internet?'
>
>
>
> Mike Godwin, Electronic Frontier Foundation
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html




More information about the Reflector mailing list