REFLECTOR: Fuel strake baffles templates
Ron Brown
romott at roadrunner.com
Mon Mar 26 15:21:59 CDT 2007
Hi Andy,
Since you are building an RG, I suggest you try the method that I found worked very well - very accurate bulkheads and baffles:
http://home.sprintmail.com/~romott/page24.html
I also did the top flanges which worked very well - NO LEAKS!!!!
Fun, fun, fun!!!!
Ronnie
----- Original Message -----
From: Andrew Ellzey
To: Velocity Aircraft Owners and Builders list
Sent: Monday, March 26, 2007 2:40 PM
Subject: REFLECTOR: Fuel strake baffles templates
To All,
I am starting my fuel strakes and I am ready to start cutting out my baffles from my 4 X 8 sheet of blue foam with the bid applied to both sides. My question is, was the patterns that came from Velocity close to the correct size or do I need to make cardboard patterns to check the fit before I make the final size cut from my full sheet of foam. I know from watching the posts over the last year and a half that most everyone made the cardboard patterns before cutting their final baffles. I also know that a lot of builders added the extra flanges to assure a good bond to the top strake, which I am also considering. What I guess I am asking is how much difference was there from the original pattern, and if there were differences was the original patterned baffle larger than the final baffle size that was installed?
Andy Ellzey
------------------------------------------------------------------------------
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070326/9891b073/attachment.html
More information about the Reflector
mailing list