REFLECTOR: strakes and bulkheads.

[Jorge Bujanda]

Noel,
Trim it flush.  See pictures attached. 
Jorge

Regards,
Jorge Bujanda
Velocity XL FG 
Palmdale, CA
Website:  http://members.dslextreme.com/users/jbujanda/
 
"Make your best case... not the best case."
"Spare the noise... convince through silence."

-----Original Message-----

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of
gattenby at tulsaconnect.com
Sent: Saturday, March 24, 2007 1:18 PM
To: Velocity Aircraft Owners and Builders list
Subject: REFLECTOR: strakes and bulkheads.


I'm glassing in the bulkheads into the strakes.
I've got a question about bulkhead #2.
The short one that attaches to the side of the fusalage, 
and has the sight gages in it.

I've glassed the inside surface to the fusalage.
As I look at the outside surface...
Where do I trim the aft edge of the "armrest / baggage 
area"?

Do I trim it flush with the #2 bulkhead? Or do I leave a 
small flange?
It would be much more easy to glass an obtuse angle than 
an acute one.

I tried to call the builders "hotline" but got the msg 
that they are closed for christmas...


Noel
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: fuelgauge4.JPG
Type: image/jpeg
Size: 69503 bytes
Desc: not available
Url : http://www.tvbf.org/mailman/private/reflector/attachments/20070324/ef321ea7/attachment-0002.jpe 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Strake 011.JPG
Type: image/jpeg
Size: 73839 bytes
Desc: not available
Url : http://www.tvbf.org/mailman/private/reflector/attachments/20070324/ef321ea7/attachment-0003.jpe