REFLECTOR: Cabin heating

[John Dibble]

Rene'
That's a great idea!  I wonder if the forward flap could be made to
operate by the air flow from the bilge blower?
The blower could also function to cool the oil when on the ground.

John

Rene Dugas wrote:

> I think if I were plumbing my heat system I would make my Heater
> flapper in the front oil cooler duct seal completely and make another
> that is in front of the cooler the place a bilge blower in the air
> line between the pilot and copilot footwells and suck air out of the
> cabin thru the hot oil and back into the cabin.  This would save the
> addition of another cooler in the cabin and accomplishes the same
> thing by only adding an aluminum flapper upstream to the nose cooler.
>
> Rene’
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070317/fc85f2f9/attachment.htm