REFLECTOR: Pitch trim
Tom Martino
tmartino at troubleshooter.com
Wed Jun 20 00:00:02 CDT 2007
If the spring is not stiff enough and the elevator is too stiff ... There
could be some stored energy before actually moving the control surface.
On 6/19/07 11:32 PM, "Al Gietzen" <ALVentures at cox.net> wrote:
> Sorry guys. I was not clear. The actuator starts immeadiatley. It is the
> elevator that does not respond for about 5 seconds following the movement of
> the actuator motor
>
> Clearly something loose in the mechanical linkage. Check the spring bracket
> connection to the torque tube.
>
> Al
>
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070619/9c32236d/attachment.htm
More information about the Reflector
mailing list