REFLECTOR: Toe Brakes, Back Bleeding
KMis178813 at aol.com
KMis178813 at aol.com
Sun Jun 10 13:11:37 CDT 2007
Try to get the air out of the toe brake master cylinders first. After doing
several toe brake installs, always had a hard time with air in the top of
pedal cylinders. Radically applying the brakes will show the air in the lines
above the cyl. bleeding out at the top of the cyl. works well. We also had
success in pumping up the brakes and then creating a vacuum on the reservoir so as
to retract the brake caliper pistons. This will squeeze all the air out of
the caliper and at least you can see where it is. Any air bubbles in the top
of the system will come to the reservoir. Keep trying it gets better.
Ken Mishler N2087M
************************************** See what's free at http://www.aol.com.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070610/faaa6290/attachment.htm
More information about the Reflector
mailing list