REFLECTOR: pitch Trim

[John Dibble]

The simplest way is to reverse the sparrow strainer.

John

Bruce Topp wrote:

> Lou,
>
>    I have the same problem.  It was suggested to put a spacer between
> the trim spring and the bracket that attaches to the actuator.  This
> effectively gives the actuator a longer reach and will provide more
> down trim.  You will probably have to experiment with the thickness of
> the spacer.
>
> Bruce Topp
>
> XL-FG
> -----------------------------------------------------------------------
> From: reflector-bounces at tvbf.org
> [mailto:reflector-bounces at tvbf.org] On Behalf Of Lou Stedman
>
> Sent: Thursday, July 12, 2007 10:06 PM
> To: Reflector Velocity
> Subject: REFLECTOR: pitch Trim
> I have an old Velocity STD and would like to adjust the pitch trim. I
> need a little more down trim. I looked at my actuator and don't see
> any way to increase the travel. What is the best way to do this?
> Lou Stedman
>
> Velocity N7044Q
> Olean, NY
>
>    ----------------------------------------------------------------
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives:
> http://www.tvbf.org/archives/velocity/maillist.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20070713/d499cf43/attachment.html