REFLECTOR: Tru-Trak servo question and answer

Keith Hallsten KeithHallsten at quiknet.com
Tue Jul 10 23:43:00 CDT 2007


Thanks, Tom, for asking the question, and thanks, Scott, for the answer!  I
was just unpacking my panel and autopilot servos today and I had the same
question, so this is extremely timely!  

I also got the TT ADI Pilot II, and it came with a "B" servo and "C" servo.
Now I know that the "C" servo is for pitch, and the "B" is for roll.

Keith Hallsten


-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Scott Baker
Sent: Tuesday, July 10, 2007 2:42 PM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Tru-Trak question

The heavy duty servo works the elevator.
SB


----- Original Message ----- 
From: "Tom" <tomcat05 at comcast.net>
To: <reflector at tvbf.org>
Sent: Tuesday, July 10, 2007 1:58 PM
Subject: REFLECTOR: Tru-Trak question

> Just received an ADI PilotII TruTrak autopilot today. Noticed that there
> are two different servos in the packaging, one of which has a larger
> motor than the other. There is no mention in the instructions about
> which servo to use for pitch vs roll (probably because of all the
> different applications). Question is, which function (pitch or roll)
> needs the larger motor servo? Both are fairly light as far as stick
> pressures but my best guess would be using the bigger servo for pitch as
> that can vary more greatly with lack of trim. Opinions welcome. Thx Tom

_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html



More information about the Reflector mailing list