REFLECTOR: Tru-Trak question

[John Tvedte]

Scott,

Do you know what servos part #'s are recommended for the Velocity - what
you have used successfully?

-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Scott Baker
Sent: Tuesday, July 10, 2007 4:42 PM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Tru-Trak question

The heavy duty servo works the elevator.
SB

----- Original Message ----- 
From: "Tom" <tomcat05 at comcast.net>
To: <reflector at tvbf.org>
Sent: Tuesday, July 10, 2007 1:58 PM
Subject: REFLECTOR: Tru-Trak question


> Just received an ADI PilotII TruTrak autopilot today. Noticed that
there
> are two different servos in the packaging, one of which has a larger
> motor than the other. There is no mention in the instructions about
> which servo to use for pitch vs roll (probably because of all the
> different applications). Question is, which function (pitch or roll)
> needs the larger motor servo? Both are fairly light as far as stick
> pressures but my best guess would be using the bigger servo for pitch
as
> that can vary more greatly with lack of trim. Opinions welcome. Thx
Tom
> _______________________________________________
> To change your email address, visit 
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives:
http://www.tvbf.org/archives/velocity/maillist.html 

_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html