REFLECTOR: Tru-Trak question

[Chuck Jensen]

I would vote for the heavier servo on the elevator because of the loads
and frequency of use; but then what to I know---I can't even count
cylinders on a Franklin.

Chuck Jensen



-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Tom
Sent: Tuesday, July 10, 2007 1:59 PM
To: reflector at tvbf.org
Subject: REFLECTOR: Tru-Trak question


Just received an ADI PilotII TruTrak autopilot today. Noticed that there

are two different servos in the packaging, one of which has a larger 
motor than the other. There is no mention in the instructions about 
which servo to use for pitch vs roll (probably because of all the 
different applications). Question is, which function (pitch or roll) 
needs the larger motor servo? Both are fairly light as far as stick 
pressures but my best guess would be using the bigger servo for pitch as

that can vary more greatly with lack of trim. Opinions welcome. Thx Tom
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html