REFLECTOR: Tips on stop drilling for cracks in the wind screen
Brian Michalk
michalk at awpi.com
Sun Jul 8 18:10:25 CDT 2007
Beef up the fuselage there where the corner of the windshield is.
I have seen pictures of hard off field landings, and it looks like this
is a weak part of the fuselage.
I would put one layer of triax, maybe 1 foot by two feet centered near
the corner. Long axis front to back.
Christopher Martin wrote:
> After seven years of flying and over 700 hours I have developed 2 cracks in
> the lower, pilot side of the front wind screen. I stop drilled each with a
> 1/16th inch drill and it appeared to work. After about 40 hours I saw that
> both cracks have continued past the stop hole by 1/8th inch. I have now
> drilled another stop hole at each extended crack.
>
> Does anyone have any advice on this?
>
>
> Christopher Martin
> christophercmartin at earthlink.net
> EarthLink Revolves Around You.
>
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
More information about the Reflector
mailing list